Quick answer
How do I send pallets from Sydney to the Central Coast?
Sydney to the Central Coast is about 95 km up the M1 from Prestons to Somersby and Tuggerah, about an hour and a half of driving each way. One to six pallets go as shared freight on a vehicle already heading up the M1, next business day for most Sydney metro pickups and confirmed on the quote; a dedicated vehicle runs direct for bigger loads. Gosford, the Peninsula, Wyong, Berkeley Vale and Charmhaven are on the same lane, and both prices come back together in minutes.
Sydney to the Central Coast is the M1 lane that does not quite reach Newcastle: about 95 km from the Prestons yard to Somersby and Tuggerah, over the Hawkesbury and up the Mooney Mooney climb. It is short enough for a dedicated vehicle to do the run and be back for an afternoon job, and it is on the way to the Hunter, so one to six pallets ride on a vehicle that is heading up the M1 anyway.
The lane runs 95 km by road, about an hour and a half of driving each way up the M1, longer when the Mooney Mooney climb is slow. We collect across Sydney Metro, Sydney South West through Liverpool, Campbelltown and Prestons, and Sydney West through Penrith and Blacktown and deliver across Gosford, West Gosford and Somersby, Erina and the Peninsula, Tuggerah, Wyong, Berkeley Vale and Charmhaven up to Lake Munmorah. Anything outside those areas is still quoted, with the extra leg shown as its own line rather than buried in the rate.
Transit: Next business day on shared freight for most Sydney metro pickups, confirmed on the quote.
Cut-offs: a quote asked for before 2pm is answered the same business day. The pickup day and the delivery window are confirmed on the booking before anything moves, and a 7am to 3pm weekday window at the receiving dock keeps waiting time, and the rate, down.
What does it cost?
The price comes back in minutes from the quote tool rather than sitting on this page as a headline that may not match your freight. Put in the two postcodes, the pallet count and the weight and you get a figure for shared freight and for a dedicated vehicle at the same time, so you can see which one is cheaper before you commit to either.
Shared freight or a dedicated truck: which is cheaper on this lane?
Shared freight puts your pallets on a trailer that is already running the lane, so you pay for the space you use. It suits one to about ten pallets, and the trade off is that the vehicle makes other stops. A dedicated vehicle runs your freight only, direct, on your timing. It costs more per pallet until you are filling most of the trailer, and then it costs less.
The vehicles that run this lane:
- 10 Pallet Rigid, 10 pallet positions and up to 7.5 t
- 12 Pallet Rigid, 12 pallet positions and up to 9 t
- 14 Pallet Rigid, 14 pallet positions and up to 12 t
- Heavy Rigid, 16 pallet positions and up to 12.5 t
- Semi Trailer, 22 pallet positions and up to 24 t
- B-double, 34 pallet positions and up to 40 t
Not sure which one? Put the freight in and both come back priced together.
What moves the price on this lane?
Pallet count. The rate per pallet drops as the consignment grows, so eight pallets on one booking beats eight pallets booked separately. If you have regular volume, a committed lane rate beats both.
Weight against space. A pallet is charged on whichever runs out first, the floor space or the weight. Dense freight like liquids, metal or paper hits the weight limit well before the trailer is full. The quote states which one applied so there is no surprise.
Access at both ends. A dock and a forklift are the cheapest way to load and unload. No forklift means a tail lift and a driver moving the freight by hand, which takes time and costs money. Residential and tight access sites cost more again. Tell us up front and it is in the quote instead of in an invoice afterwards.
Fuel. The levy moves with the diesel price and is shown as its own line, not folded into the rate.
Regular freight on this lane? Ring 0494 820 639 and we will price it as a committed lane rather than trip by trip.
Questions about Sydney to the Central Coast
How much does it cost to send a pallet from Sydney to the Central Coast?
It depends on the pallet count, the weight and whether either end needs a tail lift or a hand unload. The quote tool returns a figure in minutes for shared freight and for a dedicated vehicle together, so you can compare before booking.
Is shared freight or a dedicated truck cheaper on this lane?
Shared freight is cheaper up to roughly half a trailer. Past that the dedicated vehicle usually wins, because you stop paying a per pallet rate and start paying for the run. The quote prices both so the crossover is visible rather than guessed.
How is a pallet measured for this lane?
A standard 1165 by 1165 Australian pallet up to 1.4 metres high is one position. Over that height it may count as two. Heavy freight is charged on weight rather than space when the weight is the limiting factor, and the quote states which one applied.
What if the delivery site has no forklift?
Say so when you quote. The freight then needs a tail lift and a hand unload, both of which are priced into the quote up front rather than added after the driver arrives and cannot unload.
Do you deliver to Wyong, Tuggerah and Somersby on this lane?
Yes. The lane covers the whole Coast from Gosford and the Peninsula to Wyong, Berkeley Vale, Charmhaven and Lake Munmorah, with Somersby and Tuggerah the most common industrial drops. Pickups in those areas back to Sydney run on the same vehicle.
Is the Central Coast on the same run as Newcastle?
Often. A vehicle running the M1 to Newcastle passes the Coast on the way, so a few pallets for Somersby or Tuggerah ride on it and the per pallet rate reflects that. Say the window the receiver will take and the quote shows shared and dedicated side by side.
Do you collect pallets on the Central Coast too?
Yes. Empty pallets from Gosford, Somersby, Tuggerah and Wyong are collected on the scheduled Coast run and priced in the written offer, so a delivery and a collection can share one truck.
Palletised freight and final mile across Australia. Pricing a job? See what pallet delivery costs. Not sure what size you need? See how many pallets fit on a truck. There is a page for every vehicle in the fleet with its deck and payload. The Sydney to Melbourne, Sydney to Brisbane, Sydney to Newcastle, Sydney to Wollongong, Sydney to Canberra, Sydney to the Mid North Coast, Sydney to the Central West, Sydney to Adelaide, Newcastle to Sydney, Melbourne to Sydney and Brisbane to Sydney lanes carry their own pages. If you need the pallets too, we supply those as well.
Related questions
- Pallet freight Sydney to Canberra, a day-trip lane
- Pallet freight Sydney to Taree, Port Macquarie and Coffs Harbour
- Pallet freight Sydney to Bathurst, Orange and Dubbo
- When is a pallet pickup free?
Page updated 16 October 2026. Facts on this page are kept in step with the facts page; terms are explained in the glossary; the suburbs we stop at are on the areas page. Written by the team at 360 Operations Group, Prestons NSW; follow 360 on LinkedIn.