Maximum rigid capacity for bulk distribution. It carries 16 pallet positions and up to 12.5 t, and needs a HR class licence. Every figure on this page is the configuration on file for the vehicle, not a brochure number.
Specifications
| Pallet positions | 16 |
|---|---|
| Payload | 12.5 t |
| Load volume | 64 cubic metres |
| GVM | 23 t |
| Tare | 10.5 t |
| Overall length | 12.5 m |
| Overall width | 2.45 m |
| Overall height | 4.3 m |
| Internal length | 10 m |
| Internal width | 2.45 m |
| Internal height | 2.6 m |
| Maximum freight length | 10 m |
| Maximum freight height | 2.5 m |
| Axle configuration | 6x4 |
| Minimum licence class | HR |
Typical uses
- Bulk distribution
- Regional linehaul
- Distribution centre replenishment
Best for
- Up to 12.5 t
- 16 pallets
Body and options
- Tautliner
- Pantech
- Crane
A job this truck is built for
Sixteen pallets of DC replenishment, or a crane body for freight that no forklift at the far end can take off; the biggest rigid before a trailer is needed. With the deck full, the payload works out at about 780 kg a pallet on average; heavier pallets than that and the weight runs out before the floor does.
How the pallets sit on the deck
Is this the right size?
Pick the vehicle by the pallet count and the weight, in that order. A load that fits on the floor can still be over the payload, and a light load can still run out of positions. If you are near the line, quote both sizes and take the cheaper one. Either side of this vehicle:
- 14 Pallet Rigid, 14 pallet positions
- Semi Trailer, 22 pallet positions
Not sure? Describe the freight and every vehicle that fits comes back priced side by side.
Prefer to talk it through? Ring 0494 820 639.
Questions about the Heavy Rigid
How many pallets fit on a heavy rigid?
16 pallet positions. That is standard 1165 by 1165 Australian pallets on the floor, not double stacked. Double stacking is quoted separately because it depends on the height and the strength of your freight.
What can a heavy rigid carry?
Up to 12.5 t of freight. Load volume is 64 cubic metres.
What licence does a heavy rigid need?
A HR class licence as a minimum. The driver and the vehicle are both confirmed on the job sheet before the run.
Can I get a price without calling?
Yes. Put the pickup, the delivery and the freight into the quote tool and every vehicle that fits comes back priced, this one included. No form, no wait.
How are the pallets arranged on a heavy rigid?
16 positions, two across and 8 along, standard 1165 by 1165 pallets on the floor, not double stacked. The diagram on this page numbers the positions from the headboard, so position one goes on first and comes off last. On a multi-drop run the last delivery is loaded first and the first delivery sits at the door.
Palletised freight and final mile across Australia. Pricing a job? See what pallet delivery costs. Not sure what size you need? See how many pallets fit on a truck. There is a page for every vehicle in the fleet with its deck and payload. The Sydney to Melbourne, Sydney to Brisbane, Sydney to Newcastle, Sydney to Wollongong, Sydney to the Central Coast, Sydney to Canberra, Sydney to the Mid North Coast, Sydney to the Central West, Sydney to Adelaide, Newcastle to Sydney, Melbourne to Sydney and Brisbane to Sydney lanes carry their own pages. If you need the pallets too, we supply those as well.