Home / Pallet transport / Cubic or actual weight

Cubic or actual weight

Cubic weight or actual weight.

Loose freight is rated on whichever is greater, the weight on the scales or the weight the space is worth. 360 converts space to weight at 250 kg a cubic metre. That one factor is the whole of it, and this page works it through to a chargeable figure.

Or call Jayden on 1300 360 365, 8am to 5pm weekdays.

The factor

What is 360's cubic conversion factor?

Every figure on this page comes from 360's own vehicle catalogue and rating settings. Effective 15 November 2026.

250 kg a cubic metre, on every shared freight consignment, on every lane. It is one setting on the rating engine and it does not move by lane, by customer or by season.

SettingFigureWhat it does
Cubic conversion250 kg per cubic metreTurns the space a consignment takes into a weight that can be compared with the scales
Rating ruleThe greater of the twoLoose freight is rated on dead weight or cubic weight, whichever is higher. Never both, never the average
Pallet position cap500 kg a positionA pallet is rated by the space it occupies up to 500 kg. The weight past 500 kg is rated by weight

Dead weight is what the scales read. Cubic weight is the cubic metres multiplied by 250. The industry also uses 333 kg a cubic metre in places, so check the factor before you compare two quotes: the same carton rates a third heavier at 333 than at 250.

Worked example

How do I work out the chargeable weight?

Three lines of arithmetic. Take a consignment of loose cartons on a pallet-free run: 2.4 cubic metres on the tape, 420 kg on the scales.

StepSumResult
Dead weight, from the scalesAs weighed420 kg
Cubic weight, from the tape2.4 m³ × 250 kg600 kg
Chargeable weightThe greater of 420 kg and 600 kg600 kg

The consignment is rated at 600 kg, not 420 kg. Put the same 420 kg into 1.2 cubic metres instead and the cubic weight drops to 300 kg, the dead weight wins, and the consignment rates at 420 kg. Packing it tighter took 180 kg off the rated weight without taking a gram off the goods.

Pallets

How is a pallet rated, by space or by weight?

A pallet is rated by the position it takes up, which is the cleanest way to rate it, until it gets heavy. The position carries 500 kg. Past that the excess is rated by weight on top of the position.

StepSumResult
One standard pallet, as weighedAs weighed620 kg
Inside the position capUp to 500 kg1 pallet position
Over the cap620 kg − 500 kg120 kg rated by weight
What the consignment rates asPosition plus excess1 pallet position and 120 kg

So a pallet-only consignment under 500 kg a pallet has no chargeable weight at all, only positions. A consignment of cartons with no pallet has no positions, only a chargeable weight. Send both in the one booking and both rules apply to their own part of it.

The crossover

At what density does cubic weight take over?

At 250 kg a cubic metre exactly. Below that density the space is worth more than the scales and the consignment rates on cubic. Above it the scales win.

FreightDensityRated on
Insulation, empty drums, light packaging, furnitureUnder 250 kg/m³Cubic weight
Cartons of mixed goods, most ecommerce freightAround 250 kg/m³Either; the two are close together
Tiles, fasteners, liquids, printed stock, machine partsOver 250 kg/m³Dead weight

The practical use of the factor is to tell you which lever to pull. On light freight the way to pay less is to take the air out, so pack square, pack to the pallet footprint and keep the height down. On heavy freight nothing you do to the packing helps and the only lever left is the vehicle and the lane.

Rating your own consignment

Give the quote the cubic metres as well as the kilos.

Put the pallet count, the weight and the cubic metres in once and the quote rates it on the greater of the two, the same way the engine does.

Price a consignment How to pack a pallet

Questions about cubic and actual weight

What is the difference between cubic weight and actual weight?

Actual weight is what the scales read; cubic weight is the space the freight takes up converted to kilograms. 360 converts at 250 kg a cubic metre and rates loose freight on whichever of the two is greater, because a trailer runs out of space long before it runs out of weight on light freight.

What is 360's cubic conversion factor?

250 kg a cubic metre. One cubic metre of loose freight rates as 250 kg if it weighs less than that on the scales.

How do I calculate the cubic metres of my freight?

Length by width by height in metres, for each item, added together. A standard 1165 by 1165 mm pallet packed to 1.5 m is 1.165 × 1.165 × 1.5, which is 2.04 cubic metres.

Is cubic weight the same as volumetric or dimensional weight?

Yes, they are three names for the same thing. Air freight and parcel carriers usually call it dimensional weight and use a different factor, so the name matching does not mean the number will.

Why is my light freight charged as though it were heavy?

Because it filled space a heavier consignment could have used. The trailer is sold by the position and the cubic metre as much as by the tonne, so freight under 250 kg a cubic metre rates on what it occupied.

Does the factor change by lane or by customer?

No. 250 kg a cubic metre applies on every lane and every shared freight consignment. If a rate ever carried a different factor it would be written on the quote.

Prefer to talk? Call Jayden on 1300 360 365. Working out which vehicle the load needs as well? How many pallets fit on a truck has the positions, the payload and the cubic capacity for all thirteen classes.